Kafuter K-8818 two-component adhesive AB - 70g

Product description:

Two-component modified acrylic structural adhesive curing at room temperature, temperature resistant up to 100°C, high bond strength, no need to degrease the bonded surface, easy to use, high curing speed, can be cured in 5 to 10 minutes at room temperature; better storage Stable, leading in the world, good toughness, good resistance to oil stains and aging, higher impact strength.

Scope of application:

It can quickly bond metal, glass, plastic, wood, concrete and other materials.

Product performance:

Initial setting time: 3-30 minutes (room temperature)

Shear strength: >20 Mpa

Viscosity: 5000~8000 cps

Working temperature: -60～+100℃

Instruction:

Remove dust, grease, rust and obvious oil stains from the surface to which you will apply the adhesive

For bonding small areas, pre-mix it with a rough volume ratio of A:B=1:1 and apply to the area to be bonded and repaired. It can be overlapped and fixed. It can basically be placed within 5 -10 minutes;

Measures:

Store in a cool and ventilated place; after use, tighten the rubber cap to keep it tight; be careful not to cover the rubber caps of glue A and glue B incorrectly so that the glue does not harden; the amount of glue added at once should not be too much; this product is flammable and should be kept away from fire and heat sources; Keep out of reach of children.

Shelf life: 18 months under normal temperature conditions

Packaging specifications: 70g