Epoxy Clear - strong two-component glue - Alteco 40g

Two-component very strong epoxy adhesive for repairs and gluing. It is clear and glues joints that fit very precisely. It has a very high strength even with a thin layer of adhesive. Cures 24 hours. It belongs to the top adhesives that allow you to glue and repair even the most demanding joints with a high shear strength of min. 140 kg / cm 2 . It has a long workability time (60 minutes). Heat resistance is -20 ° C to + 100 ° C after curing.

SCOPE OF USE:

It is suitable for bonding metals, wood, chipboard, hard plastics, laminate, ceramics, porcelain, glass, concrete, stone, rubber, expanded polystyrene, etc., both to each other and to each other. Not suitable for bonding PP, PE, Teflon and silicone.

INSTRUCTIONS FOR USE:

Bonded parts must be clean, dry and degreased. Squeeze out the filler and hardener in a volume ratio of 1: 1 (two equal strips) and mix thoroughly. The workability of the adhesive is 60 minutes at room temperature. Apply the adhesive on one side, on rough and porous materials on both sides, press both surfaces together and fix them (using clamps or tape). Thoroughly clean and close the tube ends. Final functional strength after 24 hours. The minimum operating temperature is 15 ° C. Store in a dry and cool place.

TECHNICAL DATA:

Appearance: transparent liquid
Viscosity (cP / 25 ° C): (A) 10000-15000; (B) 40000-50000
Specific gravity (25 ° C / 4 ° C): (A) 1.16-1.18; (B) 0.97er: medium none; "/> Tensile strength (kg / cm 2 ): min
Workability (min.): 60
Handling strength (hours): 7
Functional strength (hours): 24
Hardness (Shore-D): 80
Mixing ratio: 1: 1 by volume
Thermal resistance (° C): -20 ° C to + 100 ° C